The OMNI 'HAMMER' Cap is a new titanium tool designed to work with OMNI Universal Domeless and OMNI D-Nail set-ups. The OMNI 'HAMMER' Cap works perfectly on both the full size 14/18mm OMNI and 10mm OMNI Mini heads. Available with a ballpoint or flathead tip. Designed and manufactured with pride in Santa Cruz, California, USA. This product is a Medical grade utensil made of Grade 2 Titanium.
What separates this model from our standard cap is the new threaded port in the side of the cap that connects to the main shaft that runs down the center. This side hole significantly reduces the downward force of the airflow passing through the center shaft of the cap. By reducing the downward pressure of air flow it allows the cup on the OMNI head to fully vaporize any concentrate while minimizing the likelihood of any overflow. This also yields a much smoother smoking experience by allowing more fresh air with your vapor.
By adding a port to the side of the cap you now have full control over how much airflow you can have going through the cap. Santa Cruz have found that having the ability to control your airflow is a crucial and integral part of achieving the perfect low temperature vapor draws. Every concentrate vaporization piece has different air flow; now with the tip of your finger you control how much air that passes through the cap. This means you can now control exactly how your nail will vaporize oil at lower temperatures and achieve the ultimate satisfactory vapor draw.
*The Dabber is not a necessity but it does add a nominal difference to air flow and suction, which adds to the functionality of The OMNI Cap.
Santa Cruz Shredder employs extremely strict Medical-Grade Ultrasonic Cleansing procedures on product components throughout the manufacturing process. Ultrasonic cleaning uses high frequency sound waves and a medical-grade cleaning solution to remove ABSOLUTELY ALL contaminates. Cavitation bubbles induced by this agitation act upon all contaminants embedded during the machining process. This action penetrates blind holes, cracks & even the tiniest recesses; thoroughly removing all traces of contamination tightly adhering to any surface (including dust, dirt, toxic machining lubricants, grease, fingerprints, and toxic polishing compounds). This is precisely the same process used in the medical industry to clean and disinfect surgical instruments before procedures.